![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Sep 2012
Location: Layton, Utah
Posts: 186
|
3/8" vs 5/16" Fuel Sending Unit
So.. I've been collecting parts to work on my truck for a while. Somehow I ordered a 3/8" sending unit from Ecklers. Well after an entire day of massaging my new fuel tank in place, O M G it's the wrong size sending unit.
No big deal, Ill just bend a new fuel line and really push on the 5/16" Rubber hose. I quickly learned bending 3/8 fuel line with a 5 dollar bender is NO BUENO. So after my 3rd piece of tubing I finally got a somewhat decent bend. The issue I had was the new sending unit was angled up slightly instead of horizontal. I had to make a crazy bend to make everything line up. My question is, am I cool using it this way or do I need to bite the bullet and 50 bones on the correct sending unit? If the float and everything works, I want to leave it this way for now. I saved my old steel line just in case I need to swap back.
__________________
James B. 1967 Chevy Fleetside Shortbed 4X2 (Black & Beautiful) 1971 Chevy Fleetside Shortbed 4X4 (White & Rough) |
![]() |
![]() |
Bookmarks |
|
|