AZ Left Over Parts

[gerfunken]

Ok, so I'm currently re-powering my 1972 Chevy K-20 and will end up with some left-over parts...

I'm in north-west Phoenix, out in Surprise. I can't deliver anything (since the truck's not running at this time.) The truck was my home yard-work & camping rig. I only drove it about 1000-1200 miles a year, some 4x4'ing, but nothing heavy duty.

Shipping is not going to be easy for me to do, but for the smaller stuff, let's see what we can do about it.

Engine: $2000 OBO GM Crate 350 HO Deluxe purchased in October 2005, less than 6000 miles on it, ran great (see if I can get a video), but it's just not a diesel. I will be keeping the A/C compressor.
HP = 330@5500 RPM
TQ = 380@3800 RPM




Externally balanced flywheel, pressure plate & clutch. (Purchased 2006) $50


SM-465 & NP-205. $750 OBO Both were rebuilt in Jan/Feb of 2006 before I installed them with the new engine.



Z-bar $25 (purchased in 2003)
Headers $50 - that clear the assembly.
Starter $40 (2006)
Master cylinder & power booster $50 (2007)



Front Fenders, $25/ea - a little rough, right side worse than left.


Tail Gate... $50 - rhino lined on the inside, slightly bowed and bumped up, you can see the bumps in the picture.


Passenger door. $50 - Little bit of rust across the bottom, it does have a 6x9 speaker hole cut in it, and the outside lower has some deformity. (best fixed with a lower skin)


Things that I don't have pictures of, and will be coming soon are the front and rear axles. D-44, 4:10 gears & H052 with matching gears.

Simply put, it's pretty much the entire driveline as I'll be converting this over to a Cummins with the matching drive line. This is going to be local pick-up only, PM me if interested and make me an offer.