6 Cyl. dist ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chucks70 · 11-27-2003, 12:58 AM

PO changed the dizzy from point to HEI on a 292. Problem is it leaks oil around where it goes into the engine. Is it supposed to have an O-ring or something on it or would 2 gaskets help seal it? It is held down tight by the dist. clamp.

Still need air cleaner and attachments for 292 with PB. Also need correct pulley set-up/bracket/harmonic balancer. No PS. Can get the alt. and water pump to line up but the belt hits the high spot in the harmonic balancer that is in between the inner and outer groove.
Can you get a machine shop to cut a new groove in the harmonic balancer?

11-27-2003, 12:58 AM	#1
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	6 Cyl. dist ? PO changed the dizzy from point to HEI on a 292. Problem is it leaks oil around where it goes into the engine. Is it supposed to have an O-ring or something on it or would 2 gaskets help seal it? It is held down tight by the dist. clamp. Still need air cleaner and attachments for 292 with PB. Also need correct pulley set-up/bracket/harmonic balancer. No PS. Can get the alt. and water pump to line up but the belt hits the high spot in the harmonic balancer that is in between the inner and outer groove. Can you get a machine shop to cut a new groove in the harmonic balancer? __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.