HEI Dizzy Woes

[punkrex]

Hello,
I'm having a trouble with my new dizzy. I know I'm going to get flamed for this but I'm attempting to install a skip white dizzy with external coil on my 65 with a 283. I ran a dedicated power source to the ignition, new coil (resistance type) and 80 millimeter plug wires. Ran points with 32 degrees total timing (18 +14, vacuum & static, respectfully).

Advancing it out static around 8 degrees it idles rough, vacuum gauge osillates between zero and ~8. If I give it gas, it dies and sputs gas outta the carb. Any more advaned and the rpms oscillates so badly it dies after a few seconds.
Tard it out to 0 and it dies unless I put my foot in the gas and it runs okay at around 2k and up... But won't idle. I'm stumped.
Posted via Mobile Device