Project Okanagan Sunset - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Snowbound · 07-02-2013, 02:14 AM

Had to pull the axles to machine the hubs down to fit my wheels. Found out my gear ratio is 3.73, not 4.11 as I had thought.

One axle was a little pitted, so I bought repair bearings for both sides. I'll have those installed when I get the posi installed next winter.

Rear suspension was completely disassembled, cleaned and painted, then reassembled with the new parts. 4" drop springs, adjustable panhard bar, rear sway bar and new shocks.

It was hot as hell today, and I must have lost 10 lbs working out there all day. Time for a cold one!
Posted via Mobile Device

07-02-2013, 02:14 AM	#28
Snowbound Registered User Join Date: Aug 2002 Location: Westbank, BC Posts: 403	Re: Project Okanagan Sunset Had to pull the axles to machine the hubs down to fit my wheels. Found out my gear ratio is 3.73, not 4.11 as I had thought. One axle was a little pitted, so I bought repair bearings for both sides. I'll have those installed when I get the posi installed next winter. Rear suspension was completely disassembled, cleaned and painted, then reassembled with the new parts. 4" drop springs, adjustable panhard bar, rear sway bar and new shocks. It was hot as hell today, and I must have lost 10 lbs working out there all day. Time for a cold one! Posted via Mobile Device Attached Images __________________ 1965 Chevy Short Box Stepside, 230 - 3 speed, 4:11 gears, original paint rust free survivor. Now sporting a 383 SBC and TKO-600



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.