Cab bushing questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jaysonb · 07-08-2013, 11:17 AM

I've got a 80 k10 that I'm getting ready for paint. The cab is sagging pretty bad, so I ordered up some new bushings. When I took one of the rear cab mount bolts out, the long bottom bushing slid off of a tube. Does the cab need to be jacked up high enough to get this tube out from the top? Seems that I would have to jack up the rear of the cab a good 6 or 7 inches, does that sound about right?
Posted via Mobile Device

07-08-2013, 11:17 AM	#1
Jaysonb Registered User Join Date: May 2009 Location: Good Thunder Mn. Posts: 955	Cab bushing questions I've got a 80 k10 that I'm getting ready for paint. The cab is sagging pretty bad, so I ordered up some new bushings. When I took one of the rear cab mount bolts out, the long bottom bushing slid off of a tube. Does the cab need to be jacked up high enough to get this tube out from the top? Seems that I would have to jack up the rear of the cab a good 6 or 7 inches, does that sound about right? Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.