Front discs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cab_01 · 07-09-2013, 11:14 AM

So in the FAQ section. It says

" 3) The 63-66 a-arms can also be used with any other spindle (71-72 or 73-87) with a simple ball joint change.
* The upper and lower ball joints and outer tie rods must match the correct year of spindle you choose."

So I should be able to go to the junk yard and just get spindles then order the correct year ball joints, calipers and rotors correct?

I have a 65 C-10. This seams to easy. Is it?

07-09-2013, 11:14 AM	#1
cab_01 Registered User Join Date: May 2013 Location: San Diego Posts: 67	Front discs So in the FAQ section. It says " 3) The 63-66 a-arms can also be used with any other spindle (71-72 or 73-87) with a simple ball joint change. * The upper and lower ball joints and outer tie rods must match the correct year of spindle you choose." So I should be able to go to the junk yard and just get spindles then order the correct year ball joints, calipers and rotors correct? I have a 65 C-10. This seams to easy. Is it?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.