Heater box screws and exhaust question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72chevyfleet · 07-21-2013, 01:04 AM

First off I replaced my heater core and the box was missing some of the small screws that I believe are 5/16" does anyone sell those? or do I have to buy them at a hardware store?
Secondly I have a set of summit racing headers on my 350 and the collectors dump out at an angle and so my exhaust right now looks horrid and im tired of seeing how low it hangs everytime I walk to it in a parking lot I was wondering if I was the only one with this issue and what a good fix would be? Thanks!

07-21-2013, 01:04 AM	#1
72chevyfleet Learning As I Go Join Date: Feb 2009 Location: scotts valley california Posts: 250	Heater box screws and exhaust question First off I replaced my heater core and the box was missing some of the small screws that I believe are 5/16" does anyone sell those? or do I have to buy them at a hardware store? Secondly I have a set of summit racing headers on my 350 and the collectors dump out at an angle and so my exhaust right now looks horrid and im tired of seeing how low it hangs everytime I walk to it in a parking lot I was wondering if I was the only one with this issue and what a good fix would be? Thanks! __________________ 1972 Chevy C-20 Longbed 2wd Granny Low with a Crate 350: Air Gap Manifold, Edelbrock 600cfm, HEI, Headers to a 40 series flow (soon to be dual again)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.