Rearend question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

biscuit · 07-25-2013, 11:52 AM

I,m working on a 54 1/2 ton short that's getting heidts mustang 2 front and chassis eng. rear . I'm going for as low a drop as i can without bottoming out on flattened squirrels ( NO BAGS just a static drop ).The question is i have a 70 nova rearend with 2.56 non possi center which is a nice match flange to flange with the stocker but was wondering if a slightly narrower diff would help with rear fender clearance I have no problem with tubbing the box for clearance.
Just would like some thoughts before i spend some money on a set of 3.08's and a possi
Drive train is 275 hp 350 and a 700r4 with 28" tires
Thanks

07-25-2013, 11:52 AM	#1
biscuit Registered User Join Date: Jan 2012 Location: west flamborough ontario Posts: 18	Rearend question I,m working on a 54 1/2 ton short that's getting heidts mustang 2 front and chassis eng. rear . I'm going for as low a drop as i can without bottoming out on flattened squirrels ( NO BAGS just a static drop ).The question is i have a 70 nova rearend with 2.56 non possi center which is a nice match flange to flange with the stocker but was wondering if a slightly narrower diff would help with rear fender clearance I have no problem with tubbing the box for clearance. Just would like some thoughts before i spend some money on a set of 3.08's and a possi Drive train is 275 hp 350 and a 700r4 with 28" tires Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.