Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-07-2013, 12:23 PM | #1 |
Registered User
Join Date: Aug 2013
Location: So*Cal - Riverside, CA
Posts: 85
|
overheating issues - 79 k10
Ok guys I need some help here.
I just put a 350 in my truck and its running hot. I tried to use all original parts, so it does not have any performance parts on it. After running for about 5 or 10 minutes the temp light comes on, and it will over heat if I’m driving it, so I don’t think it’s just them the temp sensor. Here is what it has: New thermostat New water pump New upper and lower radiator hoses New heater hoses New radiator New radiator cap The fan is running and seems to be moving air rather well I do have my shroud on Exhaust seems to be flowing fine, no blockage, after they Y pipe it has a muffler bolted up. Oil seems clear of any coolant It’s been block tested One thing I did notice that my exhaust manifold on the passenger side that has the EFE valve on it got hot enough to glow, I did check to make sure the EFE valve is open also. Outside of what I mentioned what else would be good to check? Maybe I just need some electric fans? Thanks for any help. Here are some pictures: |
Bookmarks |
|
|