65 gmc brake problems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pbluuz · 08-09-2013, 09:08 AM

Am new here, so here goes. I have a '65 gmc half ton 2wd pickup. I've never
had good solid brakes, but have just driven around the problem. I finally got
fed up and decided to fix them. I have good pedal on the first couple of applications, but after about a block or so, solid pedal, but the brakes just
won't stop the truck very well. I have checked all the wheel cylinders, adjusted the brakes, new master cylinder (bench bled). I found one front
wheel cylinder that seems to be leaking, and will replace today. Could the leaking wheel cylinder cause air to get into the system?

08-09-2013, 09:08 AM	#1
pbluuz Registered User Join Date: Aug 2013 Location: massillon ohio Posts: 4	65 gmc brake problems Am new here, so here goes. I have a '65 gmc half ton 2wd pickup. I've never had good solid brakes, but have just driven around the problem. I finally got fed up and decided to fix them. I have good pedal on the first couple of applications, but after about a block or so, solid pedal, but the brakes just won't stop the truck very well. I have checked all the wheel cylinders, adjusted the brakes, new master cylinder (bench bled). I found one front wheel cylinder that seems to be leaking, and will replace today. Could the leaking wheel cylinder cause air to get into the system?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.