Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-10-2013, 01:18 AM | #1 |
Registered User
Join Date: Mar 2012
Location: Evanston
Posts: 304
|
engine cutting out 292
I have a 292 I6 in my 69 c10 and ithas ran flawlessly until my last car show trip which ended up being 500 miles or so on the way home I noticed a small cut out in the engine when going up an incline and it has seemed to get worse since. I thought it was a fuel issue maybe the diaphragm going bad in the fuel pump so I replaced that, the fuel filter , and the carb filter with no success. So I looked into electrical problems thinking maybe the coil was dying but seemed okay other than the old hei was worn out so I replaced it with a new one no luck so I'm not sure where to look now there's no carbon build up like I'm arcing through a wire but I have limited it down to 2200 rpm and up and gets worse from there the cut out feels like a total loss of power at times or it will rhythmically run fine for 3 sec then give 3 cut outs then repeat any ideas? Sorry for the novel
Posted via Mobile Device
__________________
My Patinia'd 69 69-http://67-72chevytrucks.com/vboard/showthread.php?t=517537 My RHD 68 http://67-72chevytrucks.com/vboard/s...d.php?t=594928 |
Bookmarks |
|
|