66 c10 motor mount problems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rust=Trust · 08-13-2013, 12:44 PM

Hey guys, recently i threw a rod in my 250 I6 motor that was in my 1966 c-10.
I picked up a 350 sbc out of a 74 caprice. Im bolting it up to the Muncie 4 Speed that came in the truck untill i get a 5speed.

I ran into a problem with mounting it to the truck it looks like the old perches that bolt to the frame could be shifted forward to accomidate the 350 but when i unbolted and moved the perches forward it doesnt fit. Any advise and help would be GREATLY appreciated.

[IMG]

[/IMG]

08-13-2013, 12:44 PM	#1
Rust=Trust Registered User Join Date: Feb 2013 Location: Mission, KS Posts: 4	66 c10 motor mount problems Hey guys, recently i threw a rod in my 250 I6 motor that was in my 1966 c-10. I picked up a 350 sbc out of a 74 caprice. Im bolting it up to the Muncie 4 Speed that came in the truck untill i get a 5speed. I ran into a problem with mounting it to the truck it looks like the old perches that bolt to the frame could be shifted forward to accomidate the 350 but when i unbolted and moved the perches forward it doesnt fit. Any advise and help would be GREATLY appreciated. [IMG][/IMG]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.