Throw Your Puny 90* Air Grinder Away! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

theastronaut · 08-27-2013, 06:36 PM

I have been using a cheap/small Harbor Freight 90* grinder for years... until last week. We recently bought a better 3" cut-off grinder and I couldn't believe the difference from the old Husky grinder we had. So I started looking for a better 90* grinder. Ended up with a Matco MT3883 with 1 horse power... Yes 1 Hp! This thing rocks! You can't bog it down with a 2" grinding disc, and with a 3" disc it will flatten welds VERY quickly. Can't believe that we put up with the HF grinder for so long! Now if I could just get back all that time I wasted grinding before!

08-27-2013, 06:36 PM	#1
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,880	*Throw Your Puny 90 Air Grinder Away!** I have been using a cheap/small Harbor Freight 90* grinder for years... until last week. We recently bought a better 3" cut-off grinder and I couldn't believe the difference from the old Husky grinder we had. So I started looking for a better 90* grinder. Ended up with a Matco MT3883 with 1 horse power... Yes 1 Hp! This thing rocks! You can't bog it down with a 2" grinding disc, and with a 3" disc it will flatten welds VERY quickly. Can't believe that we put up with the HF grinder for so long! Now if I could just get back all that time I wasted grinding before! __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.