49' Patina bagged in PA

[99 to Life]

8-30-13 FINALLY, getting this thread started. Some of you probably followed my 51' build on here. The 49' I picked up about a year ago. Its going on a bagged s10 frame with a full roller vortec sbc with carb, 5 speed trans and wide whites. I just really like the patina so its staying, hard part will be matching a door that didn't come with this, bed and rear fenders. All of which I have from other parts, but I might have to really source some fitting patina parts or do a little fauxtina to get them to match.

The rims will be a bronze/gold as will the interior, with some white highlights. Shooting for a really nice vinyl seat to compliment the color scheme.

The dash as you can see is destroyed, but my (already pressed for time self) decided to bring it back to life, rather than buy a replacement. Its been about 30 hours of messing with so far.

The engine is a Vortec 350 that I got as a bottom end with heads. I put 7/16 screw in studs, new springs and seals in the heads. Bottom end has new HP King racing bearings. Will be putting a Lt4 hotcam (roller cam) in with 1.6 roller rockers. High rise dual plane intake and probably an eddy carb until I get a quickfuel carb to try out. I'm just about done with heads and bottom end, I'm waiting on cam. Compression should be 9.5 to 1, max lift will be about .522

I have a ford 9" right now I'm hoping to put in to handle the torque and HP, but its gonna need narrowed, so we'll see when that time comes. Shooting for a nice street/strip truck that I'll drive for a bit and probably sell so I can get some other projects done. More to come on those.