|
09-23-2013, 05:18 PM
|
#1 |
|
Gm for life.
Join Date: Jan 2009
Location: Baltimore, Md
Posts: 119
|
Ball joint issues.
Good day. I have a problem that I hope I can get some help with here. I have a 65 Swb C-10. I went to replace my lower ball joints. I pressed the old ones out and when I went to install the right side. It went in as it should. Pressed right up to the control arm and stayed put. When I went over to the left side. The ball joint just slips in with no need to use the press. It doesn't even stay in the control arm. I have tried just about every local parts store and I even ordered a couple from LMC. Those are the ones that the right side fits. It seems that the ball joints and the bore in the lower control arm are about 0.010" difference. I cant seem to find the right one. I can't swap out my control arms cause I made dropped control arms out of mine.
Any help would be GREATLY Appreciated. Trying to get this back together to get little more cruising in. Thank you, Phil
__________________
Phil CHEVY ONLY Baltimore, MD 65 Short wide: 383 stroker 5 spd Toys: D/D: 2017 Silverado LTZ2 crewcab 1969 Pontiac GTO Yes it is a real goat waiting its turn to be the car it was. http://www.facebook.com/home.php#/pr...59&ref=profile |
|
|
| Bookmarks |
|
|
Threaded Mode