The Official John Lee Jr Thread

[KJSR]

Originally Posted by Sharps40

And if that's the cure I might just replace the entire linkage set with a heim jointed assembly for these old clutches...no more worn shafts or egged out holes. Course, the only set I've seen like this is from LMC and I don't know what the quality might be like....I'll have to continue shopping.

I used the linkage set from LMC. I was skeptical since it was from LMC but they were the only place that had it. In the end I was very happy with it and the clutch is tight. Freeplay at the pedal is actual freeplay!