Crusty Rusty Leaky Squeaky 67 Step

[Vic1947]

There was also an ugly big hole in the cowl on the driver side that needed a patch. I opened it up some more and made a paper template then cut the patch out of some 18 ga. Drilled a couple of holes into it so that after welding the perimeter I could "spotweld" it to the support behind it.

With the lip pretty much complete, next steps will be to clamp the firewall into place temporarily, modify and mount the map lights, fish the wiring for the lights and dash cam thru the A-pillar then glue the roof on. Doesn't sound like much when you say it fast.