My 55 Chevy 4X4

[marc55]

I am lucky my friend has a 82 blazer with a 4" lift and I took some measurements. Looks like my frame all stripped has about 1 1/2 rake forward. I am going to start with the mounts that came with the truck and go from there. Like OrrieG said measure, tack, and shim. The only way to tell is to put it all back together. The truck was not assembled when I got it so this is a good time to do the fitting. I want to run as little of a body lift as possible and might have to slightly channel the bed to match the cab. Once I get the cab back on the frame it is not that much work to hang the front end. It beats watching TV.