Converting C20 to C10 with aftermarket suspension from McGaughy's

[Theoriginalsilverado]

Hi guys! Please Help me out on this one!

I have a 1975 C20- 2WD. It has that forward lean stance, and before I put it back together I want to level it out, which means only dropping the rear 1-2"

I can't find ANY lowering kits for the C20 suspension, and here's my solution:

[IMG][/IMG]

(PLEASE LET ME KNOW WHAT YOU THINK, IF IT WILL WORK, OR IF ANYONE HAS TRIED THIS)

As is sits, this is my suspension, and I would like to add some rear hangers that drop the truck 2":

I was thinking if I removed the perches for the leafs currently on my truck, and replaced them with these C-10 Perches from McGaughys:



And then installed these Drop Hangers from McGaughys:



Then I would have a dropped truck. No doubt this would work but is it ok that it's for a C10? Will it cause trouble for me?

Thanks guys.

If you have any better suggestions or advice- ANYTHING! Please post it here.[/SIZE][/SIZE]