3/4-1/2 ton conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ol'orange · 03-20-2014, 09:34 PM

I have a 59' long fleetside 8 lug gmc. I believe its a GMC 152. I'd like to switch to a half ton 5 or 6 lug pattern for ease of finding and number options for wheels. Obviously the rear should be simple to swap out. But my question is for the front. Can I just remove my 8 lug hubs and replace with a 5 or 6 lug hub? Would I need to also replace the spindle or even the axle as well? Or am I just going to need to find a IFS to weld in instead? Any advice is appreciated!

Thanks A.

03-20-2014, 09:34 PM	#1
ol'orange Registered User Join Date: Sep 2011 Location: mitchell, SD Posts: 11	3/4-1/2 ton conversion I have a 59' long fleetside 8 lug gmc. I believe its a GMC 152. I'd like to switch to a half ton 5 or 6 lug pattern for ease of finding and number options for wheels. Obviously the rear should be simple to swap out. But my question is for the front. Can I just remove my 8 lug hubs and replace with a 5 or 6 lug hub? Would I need to also replace the spindle or even the axle as well? Or am I just going to need to find a IFS to weld in instead? Any advice is appreciated! Thanks A. __________________ 72' K10 LWB (Ole' orange) 59' 150 LWB (latest addition, open to suggestions) 01' Ram 1500 (great white) 98' Honda civic (cirvics)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.