T56... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sean C · 04-01-2014, 02:36 PM

Hey all. So I'm going to be doing the T56 swap ASAP, but I have a question about parts...

Just looking around ebay I came across a few GTO T56s and I'm wondering if there is a specific generation of T56 that would work best with my 350? Or if any T56 I can get my hands on with do the job? Is there a particular adapter/bellhousing I need?

Pedal assembly:
Can I use any aftermarket pedal? Or do I need to find one specifically for a C10?

Does the T56 use a master/slave cylinder or master/hydraulic bearing?

Do I need a new transmission mount cross member?

Lots of questions here, but from searching the forum I've found lots about swapping an LS/T56 combo and much less of a T56 to 350.

I appreciate any help!

04-01-2014, 02:36 PM	#1
Sean C Registered User Join Date: Dec 2013 Location: NE Posts: 92	T56... Hey all. So I'm going to be doing the T56 swap ASAP, but I have a question about parts... Just looking around ebay I came across a few GTO T56s and I'm wondering if there is a specific generation of T56 that would work best with my 350? Or if any T56 I can get my hands on with do the job? Is there a particular adapter/bellhousing I need? Pedal assembly: Can I use any aftermarket pedal? Or do I need to find one specifically for a C10? Does the T56 use a master/slave cylinder or master/hydraulic bearing? Do I need a new transmission mount cross member? Lots of questions here, but from searching the forum I've found lots about swapping an LS/T56 combo and much less of a T56 to 350. I appreciate any help!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.