Lets talk about laying rockers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slammed96 · 04-07-2014, 09:00 PM

Ok all, I have a 64 C10 Short bed fleet side I would like to put in the weeds. Ideally my plan is to swap in a 73-87 front crossmember, rear dropmember, and do a 2.5 or 3in. Z on the frame. My question is will this be enough to lay the rockers when the truck is aired out? I'm aware that I will need to address steering and trans crossmember issues, but is there anything else that I will encounter? Ive been reading as much as I can, but more knowledge means more questions as my ideas grow.

04-07-2014, 09:00 PM	#1
Slammed96 Registered User Join Date: Apr 2013 Location: Olathe KS Posts: 156	Lets talk about laying rockers Ok all, I have a 64 C10 Short bed fleet side I would like to put in the weeds. Ideally my plan is to swap in a 73-87 front crossmember, rear dropmember, and do a 2.5 or 3in. Z on the frame. My question is will this be enough to lay the rockers when the truck is aired out? I'm aware that I will need to address steering and trans crossmember issues, but is there anything else that I will encounter? Ive been reading as much as I can, but more knowledge means more questions as my ideas grow. __________________ 14 Silverado- 4/6 drop daily 66 GMC short wide Custom Cab- building to be low and cruise. 4.8/t56 swap occurring now. Stupid low static drop 66 GMC 1 ton stepside looooong bed- the tow pig/work truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.