Step notch for a '71, and keeping ladder bars - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smashingchuck · 01-03-2004, 03:58 PM

Does anyone make a prefabbed step notch that follows the frame nicely for a 71? I need probably a 8" notch.

Also-
I would like to keep the ladder bars set up out back if possiable. I plan on boxing them and making new bag mounts out board of the originial coil location. I also think I may need to run a slight block. The question is, though - am I going to be able to make this work and lay out on a 295/30/22? Or am I going to have to get a four link instead. This truck is going to lay frame - I already have the front issues taken care of.

01-03-2004, 03:58 PM	#1
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Step notch for a '71 UPDATED! Does anyone make a prefabbed step notch that follows the frame nicely for a 71? I need probably a 8" notch. Also- I would like to keep the ladder bars set up out back if possiable. I plan on boxing them and making new bag mounts out board of the originial coil location. I also think I may need to run a slight block. The question is, though - am I going to be able to make this work and lay out on a 295/30/22? Or am I going to have to get a four link instead. This truck is going to lay frame - I already have the front issues taken care of. __________________ 78 Build Thread 4Runner Build Last edited by smashingchuck; 01-08-2004 at 01:50 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.