Brake help... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CATCHALLBLUE · 05-30-2014, 02:45 PM

I put in a new master cylinder today (already bench bled) and began to bleed my rear brakes. At first some break fluid began coming through the bleeder line (very little actually) and then nothing. So i try the other rear break and again very little comes out then nothing.

I move to the front brakes and they move fine no problems.

The fluid isnt moving at all in the rear reservoir. Whats going on here?

Its a 69 1 ton with a booster and drum brakes

05-30-2014, 02:45 PM	#1
CATCHALLBLUE Registered User Join Date: May 2014 Location: Catchall Posts: 120	Brake help... I put in a new master cylinder today (already bench bled) and began to bleed my rear brakes. At first some break fluid began coming through the bleeder line (very little actually) and then nothing. So i try the other rear break and again very little comes out then nothing. I move to the front brakes and they move fine no problems. The fluid isnt moving at all in the rear reservoir. Whats going on here? Its a 69 1 ton with a booster and drum brakes



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.