71 c10 with 73 spindles alignment issue

[Cjwhite28]

I have a 71 c10 short box and i has a set of 73-86 "western" drop spindles from another project truck along with 1 inch cpp drop springs

I checked my old paper work and they are 73-86 so i changed my upper ball joints to 73+ and my it still needs to come way out on the top for more camber its leaning in way to far.

My question is can you use 73-86 spindles on a 71 ? from what i read I should be ok as long as the ball joints are changed.

I was wondering if i can use 73+ upper control arms on the 71 so i can buy the offset control arm shafts? or if i am missing something .... i have lowered several of these with no problem but never tried the newer spindles on the older truck...