Carburetor setup. What am missing? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CATCHALLBLUE · 06-15-2014, 12:18 PM

Just rebuild a Rochester Monojet pulled off of my '69 C30. Pretty sure the PO had this baby rigged someway and what im not sure of is if im missing any cables/springs. I have a spring with 2 hooks on each end that i cant remember how it was installed. Also there was a thin wire hooked to the choke valve that ran into the cab and tied around the AC controls.

Have no idea why.

Thanks for all your great input fellas!

Name: GEDC0069.jpg
Views: 253
Size: 38.2 KB

Name: GEDC0068.jpg
Views: 245
Size: 37.1 KB

Name: GEDC0065.jpg
Views: 248
Size: 35.8 KB

Name: GEDC0063.jpg
Views: 249
Size: 22.5 KB

06-15-2014, 12:18 PM	#1
CATCHALLBLUE Registered User Join Date: May 2014 Location: Catchall Posts: 120	Carburetor setup. What am missing? Just rebuild a Rochester Monojet pulled off of my '69 C30. Pretty sure the PO had this baby rigged someway and what im not sure of is if im missing any cables/springs. I have a spring with 2 hooks on each end that i cant remember how it was installed. Also there was a thin wire hooked to the choke valve that ran into the cab and tied around the AC controls. Have no idea why. Thanks for all your great input fellas!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.