Henry needs some new pipes......lets build some exhaust!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Coach529 · 06-15-2014, 10:03 PM

OK, the SBC conversion is almost complete.....now we need some exhaust!!

Running some cheap Ebay Hugger Headers. The link is at the bottom.

Room is tight out of the headers and headed to the back of the truck so I picked up a kick from Speedway.

Pipes are now headed towards the back of the truck. I might do a slight offset up after the tranny cross member to get the pipes out of the way more.

Does muffler placement count in terms of noise as a general rule?

Cross over?

Running 2-1/2" pipe, should it all be welded or should I use some band clamps to make removal easier. Looks like on the passenger side I will have to drop at least part of the exhaust to remove the starter.

Any wisdom????

http://www.ebay.com/itm/SBC-Small-Bl...85ef9e&vxp=mtr

06-15-2014, 10:03 PM	#1
Coach529 Registered User Join Date: Nov 2012 Location: Post Falls, Idaho Posts: 1,757	Henry needs some new pipes......lets build some exhaust!! OK, the SBC conversion is almost complete.....now we need some exhaust!! Running some cheap Ebay Hugger Headers. The link is at the bottom. Room is tight out of the headers and headed to the back of the truck so I picked up a kick from Speedway. Pipes are now headed towards the back of the truck. I might do a slight offset up after the tranny cross member to get the pipes out of the way more. Does muffler placement count in terms of noise as a general rule? Cross over? Running 2-1/2" pipe, should it all be welded or should I use some band clamps to make removal easier. Looks like on the passenger side I will have to drop at least part of the exhaust to remove the starter. Any wisdom???? http://www.ebay.com/itm/SBC-Small-Bl...85ef9e&vxp=mtr __________________ 1949 Chevy 3600 "Adventures of Henry" http://smu.gs/QOlhWY



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.