Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-11-2004, 07:48 PM | #1 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
I need GMC grill education!
I have a 70 GMC (of course) in which I just replaced my core support with one from a 68. Will my 70 grill fit the 68 core support.? My hood latch bolted on fine. Also, are 68-70 grills all the same just the 69-70 has a top bar and the 68 does not. Does a 68 use the same latch assembly? Anybody have a pic of the filler panel that goes between the core support and grill? My core support(68) has nuts across the lower front, also my grill along the bottom has holes for "j" nuts that are possibly used for the filler panel. My 70 core support does not have nuts across the lower front. Whew... Hope all you'all can make heads or tells of this, pics would be great (hood latch on a 68).
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm |
Bookmarks |
|
|