07-16-2014, 02:20 PM | #1 |
Registered User
Join Date: Jan 2014
Location: Tulsa, OK
Posts: 360
|
Carb Question
I have an Eddy 600cfm carb. I recently changed the cam and installed vortec heads. My carb was set properly prior to these changes, and now it is too lean at WOT. Should I change the metering rods or the jets first to fix this? I don't wasn't to start swapping things around and get things all out of whack.
My guess is the metering rods first them larger jets but I would like a little reassurance. thanks
__________________
-Jason USN Retired |
Bookmarks |
|
|