![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Before and After
Join Date: Feb 2000
Location: Leduc, Alberta CANADA
Posts: 632
|
Stain / Protecting wooden boards
I have my wooden bed boards stained, and plan to clear coat them. Do you think 3 coats of exterior grade Marine Varnish will be enough protection?
The can says: Thin first coat 10%, apply a generous coat, a second coat should be applied 8 - 12 hours later. A third coat can be applied if desired. I think three coats will be sufficient. I have the boards all cut, grooved, and drilled before I stained them. Is there anything that I should be aware of before I start this process? I would hate to screw up the oak boards before they are in place.
__________________
Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA |
![]() |
![]() |
Bookmarks |
|
|