Crusty Rusty Leaky Squeaky 67 Step

[Vic1947]

Installed the bags temporarily in the rear and set it back on the ground. Front is shaping up to be a tester. Right off hand, it looks like the 7" OD bags are too big for the space. AZ Performance sells that size with their kits, but it really looks like 6" would be a better choice. It also appears that the bolt-on, stock style sway bar is going to have to be converted to a link setup. I think I can cut the ends, drill and tap them and mount heim joint links to a relocated boss on the A-arm. Removing the pad where the sway bar mounts would free up some space and make it more feasible to run the 7" bags. There's still the problem with the upper mounting plates though. Right now it looks like they locate the bag too far to the rear for my custom A-arms and will rub. I need to call Travis tomorrow and see what he recommends. Nobody said it would be easy.