Leaking bajo bolts on disc brake conversion

[supertrkr]

Hey guys I just put a CPP disc brake conversion on the front of my 68 C10. I was putting brake fluid in the master cylinder tonight and I saw a steady stream of fluid coming from both sides. I cranked on the bolts to the point where they might break and it's still leaking. I took the bolts out and flipped the washers and verified the bolt wasn't bottoming out in the caliper. Also I am using two washers. One on top of the ho s e and one where it meets the caliper. I am at a loss and I was wondering if anybody has a solution or been through this before.