Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-28-2014, 12:23 PM | #1 |
Senior Member
Join Date: Aug 2014
Location: Cedar Park, Texas
Posts: 326
|
1966 C1434 SWB Custom Cab
Hello Everyone,
So here's my 1966 SWB C-10 that I have owned for about 12 years now. The first few pictures were taken right after I bought it back in 2004. The side moldings were removed by the second owner and the factory steering column was swapped for a tilt column from an 90's S-10 truck. I did repair some old shoddy body work on the front end by replacing the drivers fender and the header panel (part behind the grille). When I was pulling the front end off to reseal the motor the driver side fender and the header panel had been welded together ground down and covered in lot's of bondo ( hey it was a 70's shade tree job ). Well for the most part the truck is all stock except for the 400SBC and Turbo 350 transmission that the second owner replaced the old inline 6 and three speed column shift with . The truck was parked in an old barn around 1975-76 so it is rust free. The interior is real clean so I went back with a factory steering column from a 65 powerglide truck. Last edited by CustomCab66; 07-07-2017 at 05:26 PM. |
Bookmarks |
|
|