CCP LSx Motor Mount Conversion and forward plate

[Chris Coufal]

Anyone used this? Did you have any issues? I will be calling them Monday but I'm just curious if this looks right?

My mounts are in the front holes on the frame. Is this correct? If I put them in the rear holes, the bottom of the mount does not line up on the crossmember and sits crooked.

If I put the motor plates on with the point facing forward like the instructions show, the motor is about 8" forward and sits where the radiator should be. The pan hits the crossmember. I reversed the plates and it is mounted as seen in the pics below. I still feel like the motor should be 2-2.5" back further.

The kit I ordered according to the gentleman I spoke with on the phone, was supposed to move the motor 1.25" forward and have 1-7/8" headers. To me, it looks like these are 3" forward plates and when I measured the headers they are only 1-3/4". Pretty upset that what I was told I ordered is not actually what I received.

Does anyone have any pics so I can cross reference? Can you measure your adapter plate so I can compare?
Thanks