Turn signal issues - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scotts62 · 10-03-2014, 01:51 PM

Ok so I put a '93 crew cab on a '92 frame and used the column, harness and all from the original running and driving 92. It's been a drag out on time working it in between customer jobs and I have everything working but the turn signals. Was intended to be a plug and play but didnt quite go as planned.. I'm going to work on it this weekend to try and figure it out but I can't find a schematic to trace the wires. I think it has something to do with this plug but I can't find the other end. Does anyone know where it might go by chance? Thanks

10-03-2014, 01:51 PM	#1
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Turn signal issues Ok so I put a '93 crew cab on a '92 frame and used the column, harness and all from the original running and driving 92. It's been a drag out on time working it in between customer jobs and I have everything working but the turn signals. Was intended to be a plug and play but didnt quite go as planned.. I'm going to work on it this weekend to try and figure it out but I can't find a schematic to trace the wires. I think it has something to do with this plug but I can't find the other end. Does anyone know where it might go by chance? Thanks __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 10-03-2014 at 02:33 PM. Reason: added stuff



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.