Avoid the Concrete

[Low68]

Tonight I pulled the cab off the frame again and flipped it on its back. I used some cardboard and cut a template for the general shape the bellhousing cover needed to be. I cut out a piece and then roughly bent it to fit the curve. I started in the center and tacked it working my way out. Once I got it tacked most of the way around, I cut off the excess. At the ends, I had to use a use a little persuasion to get it to fit the floor, but once that was done, I was pretty happy with the outcome. I then flipped it up and started welding the inside. Got part way done and decided to call it quits. Hopefully tomorrow I will make some good progress on finishing up the welding and grinding to smooth everything out. Here's the photos.