CA FS: Hedman Shorty Ceramic Headers for SBC - New

[zamboni2354]

I picked up these headers test fit them and they fit however they wouldn't allow me to use the factory AC compressor. I contacted Hedman and they advised that they updated the passenger side header so I found the updated version. These would be perfect if you are not running AC or at least not using the large factory A6 compressor. model 69026. Summit still shows the style for 569.97
http://www.summitracing.com/parts/hed-69026

I'm selling the headers only and not the collector's, gaskets, or bolts. I mock installed these but they have never been used.

$275 plus shipping

Jeff

specs:
Headers, Street, Mid-Length, Steel, Silver Ceramic Coated, Chevy, Small Block, Pair

Header Style:Mid-length
Header Material:Steel
Header Finish:Silver ceramic coated
Weld-Up:No
Primary Tube Diameter (in):1 3/4 in.
Collector Attachment:Ball and socket flange
Collector Diameter:3.000 in.
Tuned:No
Primary Tube Gauge:16-gauge
Flange Style:Standard
Flange Thickness (in):5/16 in.


Here's some pic's:










Here's a pic of the driver side:



Here's a pic of the passenger side on my engine:



the space issue I had was because the front tube goes up. Where it exits by the trans it angles toward the trans more than I would like but there's enough room that it works. let me know if you have any questions.