A re introduction

[Blue666(2)]

Hello All, I've been the proud owner of of a 66 C10 short bed fleetside since 2001. I had been on the board earlier as Blue666 but in trying to change my password & email at the same time, I have ended up with a new idenity. Kind of like a witness protection program.

The truck was my daily driver until 2007 but has been down for major repairs since then. The economy & life in general caused the truck to be put on the back burner until recently.

Prior to 2007, I had upgraded to disc brakes, lowered the front 3 inches, changed over from auto to 3 spd overdrive. I'm currently working to fix rust, install new wiring harness, improve general driveability and install TBI. I had also done headlight relays, electric fan and LED rear lights.

I started work on my truck while living & working near Reading, PA; kept up with the board while working in Afghanistan & Iraq and when I returned stateside but commuted home on weekends.

I've learned a lot watching your builds and seeing real professionals and other very skilled individuals do this work. My efforts will emulate your work, I only hope to be half as succssful.

Attached is a picture of my truck in 2006 or so and during my current rust repair on the driver side cowl. All advice or points are greatly apprcieated.

Thanks,

Blue666(2)