68 convesion manual to power steering - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Erl · 01-24-2004, 05:48 PM

I am presently converting my 68 3/4 4x4 from manual to power steering. I have the power box and am geting ready to mount it to the frame (dimpling the frame). But before I do this I would like to get all the parts together. The steering arm for the manual unit is straight and is held on with 4 bolts. I believe that a U shaped steering arm is required. Is a 69 P/S steering arm (U shaped) the only one that will work with the closed nuckle? Will the drag links from a 70-72 model work? Does anyone have these parts to sell?
Thanks
Erl

01-24-2004, 05:48 PM	#1
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	68 conversion from manual to power steering I am presently converting my 68 3/4 4x4 from manual to power steering. I have the power box and am geting ready to mount it to the frame (dimpling the frame). But before I do this I would like to get all the parts together. The steering arm for the manual unit is straight and is held on with 4 bolts. I believe that a U shaped steering arm is required. Is a 69 P/S steering arm (U shaped) the only one that will work with the closed nuckle? Will the drag links from a 70-72 model work? Does anyone have these parts to sell? Thanks Erl __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX Last edited by Erl; 01-25-2004 at 05:23 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.