Factory mounts to put SBC into 77 C65? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67JimmyMO · 12-03-2014, 10:19 AM

I have a 1977 C65 with a blown 366 in it.

It has the factory stock "horseshoe" front motor mount, and then the rear mounts on the bellhousing.

Would like to install a 350 SBC and was wondering if there was a factory setup for the front mount(s) I can use, or will I have to build something?

The drivers side frame is flat on top and has some holes in it but the passengers side frame rail has an upturned lip on it, doesn't look like it is made to accept a mount that bolts to the side of the block.

12-03-2014, 10:19 AM	#1
67JimmyMO Registered User Join Date: Jun 2014 Location: Southwest MO Posts: 115	Factory mounts to put SBC into 77 C65? I have a 1977 C65 with a blown 366 in it. It has the factory stock "horseshoe" front motor mount, and then the rear mounts on the bellhousing. Would like to install a 350 SBC and was wondering if there was a factory setup for the front mount(s) I can use, or will I have to build something? The drivers side frame is flat on top and has some holes in it but the passengers side frame rail has an upturned lip on it, doesn't look like it is made to accept a mount that bolts to the side of the block. __________________ 1967 GMC SWB 383 Stroker w/Saginaw 4sp 1979 Chev C30 Scottsdale Flatbed 350 4sp 2000 Chev 3500 Flatbed 454 Automatic 1978 GMC 6500 Flatbed Dump 366 5sp + 2sp 1965 Chev K10 LWB 230 4sp 1985 Chev K30 Flatbed 350 4sp



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.