Went back to the track on saturday - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 01-25-2004, 09:59 PM

I didn't improve much with the gears and posi! I went to the track sturday afternoon and made several passes! I was the only one running so we did't spray the track at all. I improved from a best of 9.128 1/8 mile to 9.103. I did have to pull the heads to install screw in studs and I'm sure I can do some more tweaking! I also improved my 60 ft time from a 2.08 to a 2.05!

For those not in on the earlier post! 71 short wide fleet with a zz4 clone with vortec heads, 1.6 roller rockers, 650 double pumper, turbo 350 with a small stall. Just changed from 3.07 single track to 3.73 posi.

01-25-2004, 09:59 PM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Went back to the track on saturday I didn't improve much with the gears and posi! I went to the track sturday afternoon and made several passes! I was the only one running so we did't spray the track at all. I improved from a best of 9.128 1/8 mile to 9.103. I did have to pull the heads to install screw in studs and I'm sure I can do some more tweaking! I also improved my 60 ft time from a 2.08 to a 2.05! For those not in on the earlier post! 71 short wide fleet with a zz4 clone with vortec heads, 1.6 roller rockers, 650 double pumper, turbo 350 with a small stall. Just changed from 3.07 single track to 3.73 posi. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.