Hood alignment help

[MAC71]

I just finished installing all the sheet metal on the front of my 69 C20. So new cab mounts and door hinge pins and everything lines up perfectly except the hood. The problem is that it is way to far over to the left.
On the left at both the front and rear it is touching the finder and on the right it has a very large gap. At the front center line it does not line up to the grill and is clearly shifted to the left. I cant see this being a fender issue, and there are no adjustments on the hood to go left or right, only front to back and up or down.

Here are the photos and what they are.

Left rear



Left front


Right rear


right front


Maybe some one can see something I am missing and suggest something.