budget friendly 700+ horse power build

[Kyle@FTP]

This is a project I started in may some time. I wanted to build a budget friendly 467 with good solid parts that will last a long time. For the naysayers, yes it can be done with patience and cruising the internet for good deals. We will be building a truck around this engine for a few events but thats for another build thread. A lot of part in this motor were bought used and checked out to make sure it was as good as new.

Stock 2 bolt 454 block (used)
stock steel crank (used)
ARP main studs (new)
Crower 6.385 long rod (used)
race-teck N2O piston (new)
13.5:1
Dart oval port alum heads no port work (used)
Clay smith solid roller (new)
Crower roller lifters (new)
Summit single plane intake (new)
Holley 850dp (used) freshened by the carb shop.

On motor is made 752hp@6700 and it will take 300 on the bottle easy and 500 on a controller.

We are thinking is has another 48hp in it with a tunnel ram and twin carbs or maybe with a better intake and a 1050. The 850dp was way out of wack.

The motor, carb to pan was built for under $6k and should last me quite a while, or until I get bored and start making changes. But it goes to show that with patients you can build a really solid bullet with out spending a ton of cash.