fuse block removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

erikh09 · 01-10-2015, 08:22 PM

Hi all,

I am sure this topic has been beat to death, but I am having a tough time pulling the fuse block from the firewall. (67 GMC). It is loose but will not budge. The bolt in the center just spins and will not come out. The panel inside the passenger compartment is loose as well. I am stumped! Also, how to the plugs come out? Do they pull straight out or up or ????. I do not plan to reuse so I guess I can always rip it out if needed.

Thanks for any help you can lend!

Erik

01-10-2015, 08:22 PM	#1
erikh09 Registered User Join Date: Oct 2011 Location: Oxford,Pa Posts: 89	fuse block removal Hi all, I am sure this topic has been beat to death, but I am having a tough time pulling the fuse block from the firewall. (67 GMC). It is loose but will not budge. The bolt in the center just spins and will not come out. The panel inside the passenger compartment is loose as well. I am stumped! Also, how to the plugs come out? Do they pull straight out or up or ????. I do not plan to reuse so I guess I can always rip it out if needed. Thanks for any help you can lend! Erik



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.