|
|
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
trb0613 Drop spindle/caliper issues 01-11-2015, 09:47 PM
J Knight Re: Drop spindle/caliper... 01-11-2015, 09:57 PM
trb0613 Re: Drop spindle/caliper... 01-11-2015, 10:52 PM
bbbc10 Re: Drop spindle/caliper... 01-11-2015, 10:15 PM
DREAMER1 Re: Drop spindle/caliper... 01-11-2015, 11:44 PM
77c10 Re: Drop spindle/caliper... 01-12-2015, 02:14 PM
Bigstevex4 Re: Drop spindle/caliper... 01-12-2015, 04:17 PM
Bigstevex4 Re: Drop spindle/caliper... 01-12-2015, 04:45 PM
trb0613 Re: Drop spindle/caliper... 01-18-2015, 12:50 PM
J Knight Re: Drop spindle/caliper... 01-18-2015, 02:02 PM
trb0613 Re: Drop spindle/caliper... 01-18-2015, 02:54 PM
Malo83 Re: Drop spindle/caliper... 01-18-2015, 03:08 PM
thirstybob Re: Drop spindle/caliper... 03-12-2020, 07:24 PM
lolife99 Re: Drop spindle/caliper... 01-18-2015, 01:06 PM
MikeB Re: Drop spindle/caliper... 03-18-2020, 06:59 PM
|
01-11-2015, 09:47 PM | #1 |
Registered User
Join Date: Oct 2014
Location: Mooresville, NC
Posts: 4
|
Drop spindle/caliper issues
This is my first post and man.... I have problems. Im in the process of installing some 2.5 " (1.00") CTS drop spindles that I purchased off ebay. When I installed the spindle and rotor, I noticed that the caliper would not bolt on correctly. After some trouble shooting, I just screwed in the caliper bolts with just the rotor on the spindle and the screws are rubbing the rotor? Has anyone had issues with the two threaded holes on the spindle being off?
|
Bookmarks |
|
|