OK I admit it. I cut the dash...SHAME Now I need a bezel/fix - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn 70 · 02-04-2015, 02:22 PM

Many years ago I had to have a CD Changer in my truck. I installed a single DIN Sony controller and a 10 disc stack. That worked great but now someone needed the faceplate more than I (this happened while it was at a paint shop Uniq Motorsport in Mesa. They also stole the custom subs and amps I had installed but I digress.)

I cannot find a replacement faceplate for the deck. I bought another deck that is single DIN. Does anyone know of either a cool billet bezel or hoooha that will fit in the radio are to make this look like a sweet install.

02-04-2015, 02:22 PM	#1
Longhorn 70 Registered User Join Date: Dec 2012 Location: Chandler AZ Posts: 1,149	OK I admit it. I cut the dash...SHAME Now I need a bezel/fix Many years ago I had to have a CD Changer in my truck. I installed a single DIN Sony controller and a 10 disc stack. That worked great but now someone needed the faceplate more than I (this happened while it was at a paint shop Uniq Motorsport in Mesa. They also stole the custom subs and amps I had installed but I digress.) I cannot find a replacement faceplate for the deck. I bought another deck that is single DIN. Does anyone know of either a cool billet bezel or hoooha that will fit in the radio are to make this look like a sweet install. __________________ 1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.