Project G-TR, Gearbox Garage Shop Truck

[GEARBOXGARAGE]

Originally Posted by DaHos

Mike, do you have any details on how you ran the rear e-brake cables?

I have the same rear brake setup and was looking at the Wilwood "universal" e-brake cable kit. I see you put the trailing arms on so the clip was on the inside. Any details would help greatly, thx, D'

Sure, I swapped the trailing arms from left to right, as you pointed out. Part of the reasoning was the way I ran my exhaust tucked up between the frame rails, there was no good path to run the brake cables. Also, I plan on running the tailpipes along the outside of the trailing arms, as I'm planning on it exiting just in front of the rear tires. Currently I just have turn downs after the mufflers.

The Wilwood universal kit you referred to is the same as the Lokar kit I used. (Lokar actually makes the kit for Wilwood) You will also need the forward brake cable and then adapt it to your factory parking brake pedal/lever, part # EC-8001U. Here's a link to it on the Lokar website: http://lokar.com/product-pgs/ebrake-...h-ebrakes.html

Let me know if this info helps. I'll look through some more pics also to see if I have anything else for a visual.

Thanks,