Question for the '64-'66 factory AC equipped trucks.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevyrestoguy · 03-01-2015, 11:23 AM

Is there a hose or tube that connects the evaporator vent to the blower motor? I have looked all through the factory manuals and have found no reference to anything of the sort. What I'm referring to is the short tube (approx. 5/8" diameter) that's a couple of inches above the drain tube. I'm assuming that it's an evaporator vent. It's right in line with the blower motor. On the later trucks (73-87, for sure), there is a rubber vent hose between the evap and the blower motor. Does the '64-'66 setup have something similar? If so, where can you find one?

03-01-2015, 11:23 AM	#1
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Question for the '64-'66 factory AC equipped trucks.... Is there a hose or tube that connects the evaporator vent to the blower motor? I have looked all through the factory manuals and have found no reference to anything of the sort. What I'm referring to is the short tube (approx. 5/8" diameter) that's a couple of inches above the drain tube. I'm assuming that it's an evaporator vent. It's right in line with the blower motor. On the later trucks (73-87, for sure), there is a rubber vent hose between the evap and the blower motor. Does the '64-'66 setup have something similar? If so, where can you find one? __________________ Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.