One tire rubs after drop spindles. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

85burb · 04-01-2015, 09:05 PM

We have a 67 c20 with factory springs that have to be sagging and drop spindles with disc brakes. The truck sits level side to side from ground to trim on wheel wells but only the passenger side tire rubs over bumps on the highway. The driver side clears fine. I *think* the front body is shifted towards the driver side 1/2-3/4 of a inch. Does not appear to have ever been wrecked. How can I push the front clip over? The tires are 235/70/16 they are a bit tall but I think if the body were centered they would clear. Any suggestions?

04-01-2015, 09:05 PM	#1
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	One tire rubs after drop spindles. We have a 67 c20 with factory springs that have to be sagging and drop spindles with disc brakes. The truck sits level side to side from ground to trim on wheel wells but only the passenger side tire rubs over bumps on the highway. The driver side clears fine. I think the front body is shifted towards the driver side 1/2-3/4 of a inch. Does not appear to have ever been wrecked. How can I push the front clip over? The tires are 235/70/16 they are a bit tall but I think if the body were centered they would clear. Any suggestions? __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.